Mold is a part of the natural environment that aids in the decomposition of leaves, trees, and other natural outdoor organic materials. Individual mold spores are invisible to the human eye and are continually floating around outside in nature. However, when those spores make their way into the indoors and are exposed to wet/humid areas they can begin to grow or colonize. It is impossible to eliminate mold and mold spores in the indoor environment due to the ingress and egress of daily human activity being carried in on clothing, shoes, and backpacks.
Mold is found almost everywhere and can grow on wood, paper, carpet, foods, insulation, ceiling tiles, clothing and painted walls as long as moisture and oxygen are present. Mold needs water/moisture to grow, therefore maintaining indoor moisture and humidity levels between 30-60 percent will reduce the likelihood of indoor mold growth. Controlling humidity in large, heavily populated buildings is difficult, especially in hot humid weather.
Molds come in a variety of colors, including white, which is sometimes seen on a damp carpet; pink, which is often found on shower walls not cleaned regularly; and darkly pigmented, which is often seen around windowsills as a result of condensation. Given a source of moisture, mold can grow just about anywhere. Moisture control, air circulation and good housekeeping practices are necessary to control mold growth.
There are no regulations governing the presence of mold or mold spores in buildings. There are also no health standards from the Centers for Disease Control and Prevention (CDC) or public health departments for concentrations of mold spores in the indoor air. The presence of visible mold on indoor building materials should be remediated.
Mold testing is not recommended in many cases. Instead, careful detailed visual inspection and recognition of moldy odors should be used to find problems needing correction. Efforts should focus on areas where there are signs of moisture or water vapor (humidity) or where moisture problems are suspected. The investigation goals should be to locate indoor mold growth to determine how to correct the moisture problem and remove contamination safely and effectively.
Air circulation in a building varies throughout the day and depends on the level of activity in that space. Mold spores are always present in both the indoor and outdoor environment and can be carried in on clothing, backpacks, shoes, etc.
University Housing will take appropriate actions including the installation of temporary dehumidifiers in student rooms if excessive humidity becomes an issue.
In most cases, the answer is yes. According to federal health and safety agencies, mold growth is commonly found in both indoor and outdoor environments. Therefore, varying levels of mold is all around us at all times.
Some people are sensitive to mold and may experience short-term or acute reactions in the presence of mold growth. Symptoms associated with mold exposure are not unique and cannot be readily distinguished from symptoms caused by other medical conditions, such as the common cold or seasonal environmental allergies. We recommend that you visit University Health Services or your health care provider if you experience any health concerns.
A qualified team of staff members from University Housing responds to work orders. Staff will knock, enter, and conduct a thorough visual inspection of furniture, wall, closets, and fan coil units to check for any evidence of mold growth or other concerns, as well as take internal temperature and humidity readings.
If mold growth is found, staff will take appropriate steps to clean or remediate the situation.
Measures will be taken to thoroughly clean and dry the area affected. This work may be completed by University Housing staff and/or an outside contractor specializing in water cleanup and restoration. If necessary, dehumidifiers, fans and/or air purifiers will be placed in the living space and will need to remain operational until they are removed to enhance the drying process to prevent future mold growth. Staff will return to check regularly on the progress until the situation has been resolved and may instruct residents in ways to assist in that process. In some cases, students may be relocated within the building to an open room for a few days to allow for proper remediation. Due to the unique circumstances around each situation, cases are managed independently with communication managed by the residence life coordinator.
Mold inspections within occupied spaces during the academic school year are only conducted at the request of a work order. Proactive inspections occur regularly throughout the year to include focusing on common areas in conjunction with the fire and life safety inspections. Comprehensive building inspections during the summer between conferences also occur each year.